Click image to view full size image
1. Lightning Rod FLR-02 Characteristic
- Sphere single lightning rods, used for protection all kinds of building from direct lightning.
- main material is stainless steel, acid-proof and rust-proof.
- Strong Wind bearing ability.
- Rod part is made from special material, with stronger air termination withstand capacity.
- Special design, with decorative function for buildings.
- Simple construction, convenient installation.
2. Lightning Rod FLR-02 Electrical parameters
3. Lightning Rod FLR-02 Installation
Firstly, install the assembled lightning rod on the top of the building (fixed the lightning rod with the building by the four ∮10mm hold of the flange, please refer to the drawing of flange). Using Zinc bonded flat steel 40mm×4mm or round steel ∮12mm as down conductor, which should be welded to the flange from grounding electrode by means of direct road. The down conductor should be attaching to the building (the outer side of the wall), and be fixed to the wall of interval 1.5m. In the end, the welded part should be painted by rust-proof material.
4. Lightning Rod FLR-02 Certificate 
Our global partners:
We are now exporting more than 100 countries and areas, mainly in Europe, Asia, Latin-America, and Middle East. Our global partner including
- Ericsson
- Sri Lanka Telecom
- Telefonica-Movie
We also can supply more of product for Lightning Rod.
If you are interested in ,please feel free contact to me!
| Model NO.:FLR-02 | ||
| Wind bearing | 40m/s | |
| Housing material | Stainless steel (202) | |
| Fixup orifice of flange | 10mm*4 | |
| Thickness of Flange | 8mm | |
| Diameter of decorative ball (D) | 200mm | |
| Diameter of Flange (T) | 240mm | |
| Max. Diameter of the rod (M) | 38mm | |
| Operating environment | outdoor | |
| Relative humidity | <=95% | |
| Height (L) | 1.5m | |
| Weight | 5kg | |
| Max implus current limp | 300KA |